RESCUE - RECOVERY
LIFTING BAGS - HEAVY LIFTING - VEHICLE RECOVERY

   

HOME
RESCUE- LIFTING BAGS

- 8-BAR LIFT BAGS
- 10-BAR LIFT BAGS
- FLAT-FORM 8-BAR
- FLAT-FORM 10-BAR
- MINI LIFT BAG KIT
- HIGH-LIFT BAGS
- USAR LIFT KIT

- SVLB LIGHT-DUTY
- MAXI-LIFT BAGS

- UNDERWATER

- CUSTOM BAGS
- HYDROTESTING


PIPE PLUGS & PACKERS
LIFT BAG HYDROTEST
HAZMAT CONTROL
UNDERGROUND ENGINEERING
SURFACE WATER MANAGEMENT
OFFSHORE - OIL BOOMS
MILITARY RESCUE
TOWING - RECOVERY
SAVACOMM WIRELESS
INFLATABLE SHELTERS
UNDERWATER LIFTING
REMOTE AREA LIGHTING
TRAINING ACADEMY
AIRCRAFTCOVERY
CONVEYER BELTS
SPORT TIRES
OFFSET PRINTING BLANKETS

CONTACT - LOCATIONS
MANUALS

TRADE SHOWS

SAVA EN ESPAÑOL


HIGH LIFT, MEDIUM PRESSURE LIFTING BAGS

High Lift Lifting Bags
Use bags in pairs, side by side, to double weight capacity and increase stability. Control pressure independently from one air source with Sava double-fitting inflation controller. High-lift bags have a soft footprint which makes them ideal for lifting softer structures when the lifting force can be spread out over a wider area to minimize additional collateral damage.

HIGH LIFT MEDIUM PRESSURE LIFTING BAGS
  PART# 521478 521479 521481 521482
DIAMETER inch 24" 30" 36" 48"
MINIMUM HEIGHT inch 2" 2" 2" 2"
LIFTING CAPACITY Lbs 6,560 10,252 14,758 26,240
MAXIMUM HEIGHT inch 17" 23" 24" 40"
BAG WEIGHT Lbs. 13 16 17 22
MAXIMUM PRESSURE PSI 14.5 14.5 14.5 14.5
VOLUME cu/ft 11 22 32 106
STORAGE CASE (FITS 2 LIFT BAGS) Part# 507410 507273 521486 521487

CARRY AND STORAGE CASE
Carry Valise
Case holds two lifting bags. Sold separately.

 

HIGH LIFT, MEDIUM PRESSURE LIFTING BAGS WITH GRIP-TOP SURFACE TOP AND BOTTOM
GripTop Pad Bags
Same as above but with special Grip Top rubber pad.
Nylon webbing reinforced rubber Grip Top pad is bonded to the top and bottom of the bag. Grip Top pad offers heavy duty protection from slipping, puncture, abrasion and premature wear. Top and bottom Grip Top pads have a micro cohesive Gecko-like footprint that sticks like glue to smooth or wet surfaces such as rock, glass and metal.

GRIP TOP LIFTING BAGS
  PART# 556575 556578 556579 556580
DIAMETER inch 24" 30" 36" 48"
MINIMUM HEIGHT inch 3" 3" 3" 3"
LIFTING CAPACITY Lbs 6,560 10,252 14,758 26,240
MAXIMUM HEIGHT inch 18" 24" 25" 41"
BAG WEIGHT Lbs. 16 20 21 27
MAXIMUM PRESSURE PSI 14.5 14.5 14.5 14.5
VOLUME cu/ft 11 22 32 106
STORAGE CASE (FITS 1 LIFT BAG) Part# 507410 507273 521486 521487
 

PROTECTIVE PADS

Protective Rubbeized Matt

TBP-C Rubberized Matt
20"x20"x1" rubberized mat protects lifting bags from sharp objects and abrasive wear.


HEAT SHIELD BLANKET

Protective Heat Shield

931060 Small Heat Shield Pad
HP Torch Blanket; HP Black Felt;
24" x 24"x1/8" tough woven silica felt welding mat can continuously withstand temperatures up to 1800°F (982°C).

931061 large Heat Shield Pad
HP Torch Blanket; HP Black Felt;
36" x 36"x1/8" tough woven silica felt welding mat can continuously withstand temperatures up to 1800°F (982°C).

 

 

LOAD PLATES

Load Plates

556309 Load Plate
16" x 16" x 5/8" Rigid rubber coated 1/4" aluminum plate spreads out concentrated loads so lifting bags stay flat (10 Lbs.).

556310 Load Plate
20 " x 20" x 5/8" Rigid rubber coated 1/4" aluminum plate spreads out concentrated loads so lifting bags stay flat (20 Lbs.).

556311 Load Plate
26 " x 26" x 5/8" Rigid rubber coated 1/4" aluminum plate spreads out concentrated loads so lifting bags stay flat (27 Lbs.).

Load plates can be used on uneven ground or when the load is smaller than the bag. Keeps the bag flat preventing lift height loss due to concentrated load depression. Works well when lifting heavy framing members, pipe sections, anything cylindrical or narrow.

 

INFLATION ACCESSORIES

Sava inflation accessories have been designed for precision control, high reliability and long life. Use only Sava controllers for maximum safety and performance.

Industrial quality, sold rubber composite hoses and brass couplers work exceptionally well in all temperatures and weather conditions from the arctic, to the desert, to the tropics.

All Sava controllers come with built-in pressure relief valves.


CONTROLLER
Medium Pressure Controller

504061 DOUBLE FITTING CONTROLLER (15 PSI)
Dual fitting controller for 3/4" low pressure distribution hose (output).
Use 3/8" yellow high pressure inflation hose for supply (input).


DISTRIBUTION HOSE

HoseLockign Ring
3/4" distribution hoses with locking ring.
504063 16' RED HOSE (PRIMARY)
504064 16' BLUE HOSE (SECONDARY)

Sava proprietary claw coupler is not interchangeable with Chicago style claw couplers.

 

SUPPLY INFLATION HOSE
HosesNytril
3/8”ID *Nytrile all-weather inflation hoses.
*Black hose is Neoprene and approved for use in mines (MSHA approved).
Choice of Black, Blue, Green, Yellow, or Red.
Select colors according to standard controller color coding.
Rubber hoses remain flexible from -40°F to +212°F (-40°C to 100°C).
Nytrile rubber is naturally resistant to oil & fuel.
All hoses come with proprietary safety couplers which are compatible with Sava air bags, controllers and associated accessories.
Use adapters to convert air compressor, truck air, or other air source to Sava safety couplers.
Burst pressure, 1,000 PSI.

HOSE COLOR CODE SELECTOR AND APPLICATION TABLE
PART
COLOR
ID/OD
LENGTH
COUPLER
TYPE

RELIEF &
SHUT-OFF

TYPE RUBBER
APPLICATION
77682SC20
YELLOW
3/8"/5/8"
20'
Safety
NONE
Nytrile
SUPPLY HOSE
77679SC20
BLUE
3/8"/5/8"
20'
Safety
NONE
Nytrile
PRIMARY DISTRIBUTION
76683SC20
RED
3/8"/5/8"
20'
Safety
NONE
Nytrile
SECONDARY DISTRIBUTION
77680SC20
GREEN
3/8"/5/8"
20'
Safety
NONE
Nytrile
THIRD DISTRIBUTION
77678SC20
BLACK
3/8"/5/8"
20'
Safety
NONE
Neoprene
FOURTH DISTRIBUTION
77682SC35
YELLOW
3/8"/5/8"
35'
Safety
NONE
Nytrile
SUPPLY HOSE
77679SC35
BLUE
3/8"/5/8"
35'
Safety
NONE
Nytrile
PRIMARY DISTRIBUTION
76683SC35
RED
3/8"/5/8"
35'
Safety
NONE
Nytrile
SECONDARY DISTRIBUTION
77680SC35
GREEN
3/8"/5/8"
35'
Safety
NONE
Nytrile
THIRD DISTRIBUTION
77678SC35
BLACK
3/8"/5/8"
35'
Safety
NONE
Neoprene
FOURTH DISTRIBUTION
77682SCV20
YELLOW
3/8"/5/8"
20'
Safety
*YES
Nytrile
SUPPLY HOSE
77679SCV20
BLUE
3/8"/5/8"
20'
Safety
*YES
Nytrile
PRIMARY DISTRIBUTION
76683SCV20
RED
3/8"/5/8"
20'
Safety
*YES
Nytrile
SECONDARY DISTRIBUTION
77680SCV20
GREEN
3/8"/5/8"
20'
Safety
*YES
Nytrile
THIRD DISTRIBUTION
77678SCV20
BLACK
3/8"/5/8"
20'
Safety
*YES
Neoprene
FOURTH DISTRIBUTION
77682SCV35
YELLOW
3/8"/5/8"
35'
Safety
*YES
Nytrile
SUPPLY HOSE
77679SCV35
BLUE
3/8"/5/8"
35'
Safety
*YES
Nytrile
PRIMARY DISTRIBUTION
76683SCV35
RED
3/8"/5/8"
35'
Safety
*YES
Nytrile
SECONDARY DISTRIBUTION
77680SCV35
GREEN
3/8"/5/8"
35'
Safety
*YES
Nytrile
THIRD DISTRIBUTION
77678SCV35
BLACK
3/8"/5/8"
35'
Safety
*YES
Neoprene
FOURTH DISTRIBUTION
 
REGULATORS
For use with high pressure SCBA cylinders.

Regulators
72128-CGA-8 bar, Single-stage Piston Regulator (CGA) for long life and precision control from 0-116 psi. Fits all CGA346 and CGA347 cylinders. Input up to 6,000 psi
72128-CGA-10 bar, Single-stage Piston Regulator (CGA) for long life and precision control from 0-145 psi. Fits all CGA346 and CGA347 cylinders. Input up to 6,000 psi
72128-1 Single-stage Diaphragm Regulator (CGA) economical control from 0-116 psi. Fits CGA347 DOT cylinders.
72128-0 Single-stage Diaphragm Regulator (CGA) economical control from 0-116 psi. Fits CGA346 DOT cylinders.
72128 Single-stage Diaphragm regulator (DIN) for international DIN type cylinders. 0-8 bar. Fits DIN only, not for USA DOT cylinders.

 

COMPRESSOR ADAPTERS

Sava lifting bag accessories are designed primarily to connect to Sava high pressure cylinder regulators. For industrial use an additional adapter may be needed to be able to plug Sava air hose safety couplers to your system.

Commercial Compressor Adapter
PCA-1 Industrial Interchange compressor adapter

Construction Compressor Adapter
TCA-1 Chicago claw compressor adapter

Air Brake Adapter
GCA-1 Glad-Hands air brake adapter


SAVATECH CORP - PORT ORANGE FLORIDA - 386-760-0706 - 888-436-9778

Credit Cards Accepted